Urlinski – EN
tophotmovie

MIXER FOR POWDERS TYPE MP 12P

Mixer type MP 12P is used for intensive, thorough mixing and homogenizing of friable masses, consisting of many components. The ellipsoid bottom of predefined radius with high-speed knife/hammer mixing agitator, mounted in the center of the bottom and equipped with infinitely variable regulation of the rotational speed, together with the cover, having shape of a cone, directed with its vertex inside the vessel, ensures effective averaging of the components into the homogeneous mass.

The machine has shown its efficiency especially by production of cosmetic powders, eye-shadows and rouges, thanks to the central injection option of the binder during the mixing process without necessity of opening the cover.

Technical data:

  • fixed construction with shields of acid resistant steel
  • vessel material acid resistant steel AISI 304 ( option AISI 316L )
  • vessel capacity ca. 60 liters
  • batch volume 12 kg
  • the vessel is equipped with a cooling jacket
  • surface of the vessel is polished from both sides to mirror finish
  • the bottom of ellipsoid shape with pre-defined radius
    high speed knife/hammer mixing device is placed in the center of the bottom
  • as an option, infinitely variable regulation of the rotational speed with frequency inverter is possible, with value indication on LCD; the mixing agitator shaft is sealed with mechanical flow seal SIC-SIC with prevention of “dry work” of the drive assembly
    sealing agent: water flow or system with sealing liquid under pressure
  • mixing agitator drive power 11 kW
    the cover in shape of a cone with vertex directed inside, with silicone gasket, opened on a hinge with screw closing
    the drive motor is automatically switched off by opening the cover
  • the vessel is tilted on 110 degrees by means of the electric motor
  • in the center of the cover is placed a stud pipe with a nozzle for injection of binder
  • in the back side of the construction is mounted a funnel with capacity of ca. 3 liters together with membrane pump for binder injection to the vessel during the mixing process
    mechanical filter for evacuation of the air from the vessel for
  • prevention of appearance of the over-pressure inside the vessel
  • programming unit for assignment of mixing modes, pre-defined by the customer, as well as one mode for manual control
  • of rotational speed, time of work of the mixing device and binder injection

OUR CLIENTS